반응형

 

작성일: 2023년 10월 15일

 


[ 강의 동영상 ]
계영수 님이 GNS3 강의 동영상을 만든지 4년이 지나서 지금 GNS3 버전과 GUI 구성이 조금 달라서 헷갈릴 수 있지만,
이 동영상이 큰 도움이 된다.

  https://www.youtube.com/playlist?list=PL30o9a_lTg-KN4UmwKj2txuY3Vrd1nMrx

 

 

GNS3 및 CISCO Switch 명령 예제 모음

 

 

테스트할 때마다 사용하는 명령을 명령어 수행 순서대로 기록해보았다.

 

 

CISCO Switch Port에 IP Address 설정하기

##
## CISCO Switch Port에 IP Address 설정하기
## 
 
R1# configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
 
R1(config)# interface fastEthernet 0/0
 
R1(config-if)# ip address 10.1.1.1 255.255.255.0
 
R1(config-if)# no shutdown 
 
R1(config-if)# end
*Jul  2 21:14:42.231: %SYS-5-CONFIG_I: Configured from console by console
 
R1# ping 10.1.1.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/30/68 ms
 
R1#

 

 

CISCO Switch Loopback Port에 IP Address 설정하기

R1# configure terminal 
Enter configuration commands, one per line.  End with CNTL/Z.
 
R1(config)# interface loop0
R1(config-if)#
*Jul  3 12:59:03.859: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up
 
R1(config-if)# ip address 1.1.1.1 255.255.255.255
R1(config-if)# end
R1#
*Jul  3 12:59:45.647: %SYS-5-CONFIG_I: Configured from console by console
R1#

 

 

CISCO Switch에 BGP 설정하기

##
## AS 100을 관리하는 라우터(R1) 설정
##
 
R1# configure terminal 
Enter configuration commands, one per line.  End with CNTL/Z.
 
R1(config)# router bgp 100
R1(config-router)# neighbor 10.1.1.2 remote-as 200
R1(config-router)# end
R1#
*Jul  3 13:05:03.939: %SYS-5-CONFIG_I: Configured from console by console
R1#
 
 
##
## AS 200을 관리하는 라우터(R2) 설정
##
 
R2# configure terminal 
Enter configuration commands, one per line.  End with CNTL/Z.
 
R2(config)# router bgp 200
R2(config-router)# neighbor 10.1.1.1 remote-as 100
R2(config-router)# end
R2#
*Jul  3 13:07:28.543: %SYS-5-CONFIG_I: Configured from console by console
R2#
*Jul  3 13:07:35.307: %BGP-5-ADJCHANGE: neighbor 10.1.1.1 Up 
R2#

 

 

BGP 설정 내용 확인하기

##
## 간략한 BGP 정보를 보는 명령
##
 
R1# show ip bgp summary
 
BGP router identifier 1.1.1.1, local AS number 100
BGP table version is 1, main routing table version 1
 
Neighbor        V           AS MsgRcvd MsgSent   TblVer  InQ OutQ Up/Down  State/PfxRcd
10.1.1.2        4          200       7       7        1    0    0 00:02:53        0
 
 
##
## 상세한 BGP Neighbor 정보를 보는 명령
##
 
R1# show ip bgp neighbors 
BGP neighbor is 10.1.1.2,  remote AS 200, external link
  BGP version 4, remote router ID 2.2.2.2
  BGP state = Established, up for 00:05:43   ## <-- state 값을 확인해야 함.
  Last read 00:00:20, last write 00:00:14, hold time is 180, keepalive interval is 60 seconds
  Neighbor sessions:
    1 active, is not multisession capable (disabled)
  Neighbor capabilities:
    Route refresh: advertised and received(new)
    Four-octets ASN Capability: advertised and received
    Address family IPv4 Unicast: advertised and received
    Enhanced Refresh Capability: advertised and received
    Multisession Capability: 
    Stateful switchover support enabled: NO for session 1
  Message statistics:
    InQ depth is 0
    OutQ depth is 0
    
                         Sent       Rcvd
    Opens:                  1          1
    Notifications:          0          0
    Updates:                1          1
    Keepalives:             8          8
    Route Refresh:          0          0
    Total:                 10         10
  Default minimum time between advertisement runs is 30 seconds
 
 For address family: IPv4 Unicast
  Session: 10.1.1.2
  BGP table version 1, neighbor version 1/0
  Output queue size : 0
  Index 1, Advertise bit 0
  1 update-group member
  Slow-peer detection is disabled
  Slow-peer split-update-group dynamic is disabled
                                 Sent       Rcvd
  Prefix activity:               ----       ----
    Prefixes Current:               0          0
    Prefixes Total:                 0          0
    Implicit Withdraw:              0          0
    Explicit Withdraw:              0          0
    Used as bestpath:             n/a          0
    Used as multipath:            n/a          0
 
                                   Outbound    Inbound
  Local Policy Denied Prefixes:    --------    -------
    Total:                                0          0
  Number of NLRIs in the update sent: max 0, min 0
  Last detected as dynamic slow peer: never
  Dynamic slow peer recovered: never
  Refresh Epoch: 1
  Last Sent Refresh Start-of-rib: never
  Last Sent Refresh End-of-rib: never
  Last Received Refresh Start-of-rib: never
  Last Received Refresh End-of-rib: never
				       Sent	  Rcvd
	Refresh activity:	       ----	  ----
	  Refresh Start-of-RIB          0          0
	  Refresh End-of-RIB            0          0
 
  Address tracking is enabled, the RIB does have a route to 10.1.1.2
  Connections established 1; dropped 0
  Last reset never
  Transport(tcp) path-mtu-discovery is enabled
  Graceful-Restart is disabled
Connection state is ESTAB, I/O status: 1, unread input bytes: 0            
Connection is ECN Disabled, Mininum incoming TTL 0, Outgoing TTL 1
Local host: 10.1.1.1, Local port: 37711
Foreign host: 10.1.1.2, Foreign port: 179
Connection tableid (VRF): 0
Maximum output segment queue size: 50
 
Enqueued packets for retransmit: 0, input: 0  mis-ordered: 0 (0 bytes)
 
Event Timers (current time is 0x118E84):
Timer          Starts    Wakeups            Next
Retrans            10          0             0x0
TimeWait            0          0             0x0
AckHold             9          6             0x0
SendWnd             0          0             0x0
KeepAlive           0          0             0x0
GiveUp              0          0             0x0
PmtuAger            1          0        0x157854
DeadWait            0          0             0x0
Linger              0          0             0x0
ProcessQ            0          0             0x0
 
iss: 1109643795  snduna: 1109644028  sndnxt: 1109644028
irs:  864525182  rcvnxt:  864525415
 
sndwnd:  16152  scale:      0  maxrcvwnd:  16384
rcvwnd:  16152  scale:      0  delrcvwnd:    232
          
SRTT: 737 ms, RTTO: 2506 ms, RTV: 1769 ms, KRTT: 0 ms
minRTT: 48 ms, maxRTT: 1000 ms, ACK hold: 200 ms
Status Flags: active open
Option Flags: nagle, path mtu capable
IP Precedence value : 6
 
Datagrams (max data segment is 1460 bytes):
Rcvd: 19 (out of order: 0), with data: 10, total data bytes: 232
Sent: 20 (retransmit: 0, fastretransmit: 0, partialack: 0, Second Congestion: 0), with data: 10, total data bytes: 232
 
 Packets received in fast path: 0, fast processed: 0, slow path: 0
 fast lock acquisition failures: 0, slow path: 0
TCP Semaphore      0x6AA22B60  FREE 
 
R1#

 

 

IP Routing Table 정보 조회하기

R1# show ip route 
 
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override
 
Gateway of last resort is not set
 
      1.0.0.0/32 is subnetted, 1 subnets
C        1.1.1.1 is directly connected, Loopback0
      10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C        10.1.1.0/24 is directly connected, FastEthernet0/0
L        10.1.1.1/32 is directly connected, FastEthernet0/0
 
R1#

 

 

BGP 이용하여 Network Route 광고(Advertisement)

##
## R1 라우터가 이웃 라우터에게 Advertisement하기
##
 
R1# configure terminal 
Enter configuration commands, one per line.  End with CNTL/Z.
 
R1(config)# router bgp 100
R1(config-router)# network 1.1.1.1 mask 255.255.255.255   ## <-- Route 광고하기
R1(config-router)# end
*Jul  3 14:26:39.559: %SYS-5-CONFIG_I: Configured from console by console
R1#
 
 
##
## 이웃 라이터(예: R2)에서 수신한 Route Advertisement 정보를 확인
##
 
R2# show ip bgp summary 
BGP router identifier 2.2.2.2, local AS number 200
BGP table version is 2, main routing table version 2
1 network entries using 148 bytes of memory
1 path entries using 64 bytes of memory
1/1 BGP path/bestpath attribute entries using 136 bytes of memory
1 BGP AS-PATH entries using 24 bytes of memory
0 BGP route-map cache entries using 0 bytes of memory
0 BGP filter-list cache entries using 0 bytes of memory
BGP using 372 total bytes of memory
BGP activity 1/0 prefixes, 1/0 paths, scan interval 60 secs
 
Neighbor        V           AS MsgRcvd MsgSent   TblVer  InQ OutQ Up/Down  State/PfxRcd
10.1.1.1        4          100      83      82        2    0    0 01:11:20        1  ## <- 이 값이 1로 변경되었는지 확인
R2#

 

 

BGP Network Route 광고 정보 조회

##
## 라우터 R1에서 BGP 정보 조회
##
 
R1# show ip bgp
BGP table version is 2, local router ID is 1.1.1.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, 
              r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter, 
              x best-external, a additional-path, c RIB-compressed, 
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
 
     Network          Next Hop            Metric LocPrf Weight Path
 *>  1.1.1.1/32       0.0.0.0                  0         32768 i
 R1#
 
 
##
## 라우터 R2에서 BGP 정보 조회
##
 
R2# show ip bgp
BGP table version is 2, local router ID is 2.2.2.2
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, 
              r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter, 
              x best-external, a additional-path, c RIB-compressed, 
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
 
     Network          Next Hop            Metric LocPrf Weight Path
 *>  1.1.1.1/32       10.1.1.1                 0             0 100 i
R2#

 

 

 

 

 

 

 

'Network' 카테고리의 다른 글

Linux Networking Control with C language, Golang (Netfilter, Netlink)  (0) 2023.03.03
CISCO ACI(Application Centric Infra), APIC and Kubernetes  (0) 2022.07.19
GNS3 사용을 위한 CISCO IOS 구하는 방법  (0) 2022.07.01
BFD (Bidirectional Forwarding Detection) 개요, 예제  (0) 2022.06.29
Kubernetes, OCP Cluster에서 DPDK CNI 사용하는 방법  (0) 2022.06.22

+ Recent posts

티스토리툴바